iPhone Cases · OEM & Wholesale
We mould iPhone cases in our own factory in Dongguan: magnetic MagSafe shells, rotating ring stands, card holders and foldable covers. Buy from 100 pcs per model, add your logo, and ship DDP to your warehouse. No trading company in between.
Stock moulds are listed below. A chassis we do not have takes 20–35 days of tooling.
iPhone 17 · 17 Pro · 17 Pro Max · 17 Air
iPhone 16 · 16 Plus · 16 Pro · 16 Pro Max
iPhone 15 · 15 Plus · 15 Pro · 15 Pro Max
iPhone 14 · 14 Plus · 14 Pro · 14 Pro Max
iPhone 13 · 13 mini · 13 Pro · 13 Pro Max
iPhone 12 · 12 Pro · 12 Pro Max · 11 · 11 Pro Max
iPhone Fold · iPhone Duo (foldable chassis)
SE 2/3 · XR · XS · XS Max (subject to mould availability)
Badges show how many iPhone generations each range covers. Ranges marked Dual also cover Galaxy S models — the badge tells you the exact split.
iPhone tooling is less forgiving than Android. The camera plateau moves between generations, the button positions shift by fractions of a millimetre, and MagSafe requires a magnet ring placed within about a millimetre of the official position or accessories will attach but charge slowly.
Three things we control on every iPhone programme:
For a deeper technical write-up, see our guide on MagSafe magnet grades and holding force and the materials comparison.
These are the tolerances we hold on every iPhone programme. They are the numbers a buyer should ask any supplier to confirm in writing.
| Parameter | Spec | Why it matters |
|---|---|---|
| Camera lip above lens | 1.2–1.5 mm | Below 1.0 mm the lens touches a desk when the phone is face-down |
| MagSafe ring offset | ≤ 1.0 mm from official geometry | A 1.5 mm offset still holds a wallet but drops charging speed |
| Magnet grade | N52 array (N42 acceptable on thick shells) | N52 gives the same hold in less thickness, which matters on slim cases |
| Magnet retention | Over-moulded or bonded, not loose press-fit | Press-fit magnets break free after repeated drops |
| Button relief | Moulded inner relief on every covered button | Without it the click turns mushy after a few thousand presses |
| Back panel thickness over magnet | ≤ 1.2 mm | Every extra 0.3 mm measurably cuts magnetic holding force |
| Front lip / screen clearance | 0.8–1.0 mm raised | Protects the glass on face-down drops without blocking edge swipes |
| Hinge / fold clearance (foldables) | Two halves close flush, no gap, no resistance | A case 0.2 mm too thick loads the hinge permanently |
Tolerance on colour: visually matched under D65 light against a physical chip, not a screen colour. For critical Pantone references we send a chip for approval before the run.
| Order type | MOQ | Lead time | Notes |
|---|---|---|---|
| Stock design, stock mould | 100 pcs per model | 7–10 days | Models can be mixed in one order |
| + Custom logo printing | 300 pcs per model | 10–15 days | Silk screen, UV print or laser engraving |
| + Custom retail packaging | 500 pcs per model | 15–20 days | Artwork in AI or PDF required |
| New chassis tooling | 1,000 pcs per model | 20–35 days | Tooling fee quoted separately |
| Sample order | 1–5 pcs | 5–7 days | Sample cost refundable on the first bulk order |
Payment is a deposit at order confirmation with the balance due before shipment, after inspection. Third-party inspection is welcome. Shipping runs by air express (3–7 days), air freight (8–14 days) or sea (15–35 days) depending on volume and urgency.
| Buyer type | Recommended range | Why |
|---|---|---|
| Retail brand, first range | Card holder or pivot ring stand | Function-led benefit sells without colour alone; accepts logo on the back panel with no extra tooling |
| Accessory seller adding magnetic line | Clear magnetic case | Supports MagSafe wallets and chargers while the phone colour stays visible |
| Premium positioning | Leather foldable or AG matte | Surface finish reads as premium in photography; leather takes hot-stamp debossing |
| Heavy-duty / outdoor buyers | Gold Shield 360 armour | Full-body PC + TPU with corner air cushions and a lockable ring |
| Foldable-oriented buyers | AG matte, magnetic or privacy foldable | Hinge cover and offset magnet array are built in, not retrofitted |
Start with the card holder case or the ring stand case. Both are function-led, which means they sell on a visible benefit instead of colour alone, and both accept logo printing on the back panel without extra tooling.
The clear magnetic case keeps the phone's original colour visible while supporting MagSafe wallets and chargers. It is the easiest upsell next to a wallet or car mount you already sell.
The leather foldable and AG matte ranges use surface finishes that read as premium in product photography. Leather takes hot-stamp debossing, which is the most credible branding option we offer.
Send the iPhone models, target quantity and any artwork. We confirm mould availability the same day.
1–5 pcs in 5–7 days. Test fit, camera clearance and magnet hold yourself before committing.
Stock colours run in 7–15 days. Custom colours or printing add a set-up slot.
In-line QC through production, pre-shipment inspection before packing. Third-party inspectors welcome.
Balance paid, goods move by express, air or sea. Tracking goes to you as soon as they leave.
100 pcs per model for stock colours and stock moulds. Custom logo printing raises it to 300 pcs per model, custom retail packaging to 500 pcs.
Yes. A mixed-model order is standard as long as the total volume clears the MOQ threshold and the colour count stays manageable.
Yes, for iPhone 17, 17 Pro, 17 Pro Max and 17 Air on most ranges. Confirm the specific range you want and we will check the mould list against it.
20–35 days for tooling, then normal production time. This applies to any chassis we do not already run.
Yes, DDP is available for the US, EU and UK through our forwarder, including duty and VAT where applicable.
Send the models, quantity and artwork you have in mind. You get pricing, mould status and a sample plan within one business day.
