Samsung Cases · Galaxy S & Z Series
Foldables need a different case than slab phones. We cut hinge covers that flex without delaminating, route magnet arrays clear of the fold, and keep the two halves closing flush. Also available: ring stands and heavy-duty shells for the Galaxy S and Note range.
Stock moulds are listed below. A chassis we do not have takes 20–35 days of tooling.
Z Fold 3 · 4 · 5 · 6 · 7 · 8 · 8 Ultra · W25
Z Flip 3 · 4 · 5 · 6 · 7 · 8
Z Fold 8 Wide
S22 · S22 Ultra · S23 · S23 Plus · S23 Ultra · S23 FE · S24 · S24 Ultra
A14 5G · A34 5G · A54 5G
Note 20 Ultra
Huawei Mate X3/X5/X6/XT · Honor Magic V3/V5/VS3 · OPPO Find N5 · Pixel 10 Pro Fold
iPhone Duo / iPhone Fold chassis
Every range below is tooled for Galaxy Z Fold or Z Flip. Model counts are shown on each card.
A foldable case is not a slab case with a bend in it. The hinge introduces a moving part, a gap that collects debris, and a surface that cannot be covered with a rigid material. Most foldable case failures reported by users trace back to this area.
Full write-up: foldable case hinge protection.
For slab Samsung models the requirements are different. Buyers usually want either a slim functional case or a heavy-duty shell, and the two should not share a mould.
The pivot ring stand and card holder ranges cover the S22 through S24 family including Ultra variants. Both use a rigid PC back with TPU rails, so the printing surface stays flat while the sides absorb impact.
The Gold Shield 360 is a full-body armour shell: PC outer, TPU inner sleeve, corner air cushions and a lockable 360-degree ring. It suits buyers selling to tradespeople, outdoor users or anyone replacing a case every few months because the previous one cracked.
For the foldable front screen we offer a tempered privacy layer that is sharp head-on and blocks viewing beyond 28 degrees to the side. Head-on transmission is about 68%, so the screen looks slightly dimmer than bare glass.
| Order type | MOQ | Lead time |
|---|---|---|
| Stock mould, stock colour | 100 pcs per model | 7–15 days |
| Custom colour | 300 pcs per colour | 10–18 days |
| Electroplated frame | 500 pcs per model | +3–5 days on top of production |
| Leather lamination | 300 pcs per model | 12–20 days |
| Magnetic foldable | 200 pcs per model | 12–20 days |
| New chassis tooling | 1,000 pcs per model | 20–35 days |
Foldable cases carry a higher unit cost than slab cases — more parts, tighter tolerances, a flexible hinge section and more assembly steps. The tooling is also more complex, which raises both the one-time cost and the development time.
Galaxy Z Fold and Z Flip are exclusive to this page. Galaxy S slab models are covered by our dual-platform ranges, which are listed on the iPhone page because iPhone is their primary market. Each of these is tooled for Galaxy S as well:
If you need a slab case with a Samsung-first design — different camera cut, different colour range — tell us the model and we quote separate tooling.
Send the exact Galaxy models. We confirm which moulds exist and which need tooling.
Test the fold 200 times before you commit: open and close and look for whitening at the hinge cover edges.
Stock colours 7–15 days; plated or leather finishes add 3–7 days.
We check flush closing, hinge adhesion and magnet hold before packing.
Express, air or sea, DDP available. Tracking sent on dispatch.
Yes, including Fold 8 Ultra and the Fold 8 Wide variant, across several ranges: AG matte, full-cover magnetic, rotating ring stand, leather and privacy glass front.
Not with leather alone. The hinge section needs a flex material bonded between the two rigid halves. Ask any supplier which material crosses the fold.
Yes on our magnetic foldable range. The N52 array is placed clear of the hinge and supports up to 15 W MagSafe on compatible phones.
More parts, tighter tolerances, a flexible hinge section and more assembly steps. Tooling is also more complex and takes longer to develop.
Yes — Mate X3/X5/X6/XT, Honor Magic V3/V5/VS3, OPPO Find N5 and Google Pixel 10 Pro Fold are all in our foldable mould list.
Tell us the models and quantity. We confirm mould availability the same day and send pricing within one business day.
